We answer all phone calls personally!
Call us at (781) 595-7074 and speak to a Master Electrician

Call for Peace of Mind, We'll do the rest
Safety | Convenience | Accessibility | Reduced Downtime | Facility Equipment Audits kept on record

Sign up for McCurdy Mail

Archive for August 2015

Reasons for an Electrical Inspection

August 26, 2015

An electrical safety inspection involves a comprehensive check-up of your entire electrical system. Over time and with frequent use, all electrical installations have a tendency to deteriorate.

mom and kidsA regular electrical inspection should be performed to analyze and evaluate the condition of your electrical system for these reasons:

1)  An inspection makes certain that your fixtures are safe to use
2)  An inspection identifies faulty or degraded wiring
3)  An inspection reveals electrical hazards
4)  An inspection reveals improper grounding or bonding

Therefore, an electrical inspection determines whether the electrical system is good for continued use, or hides any impending dangerous electrical hazards.

It is important that an electrical safety inspection be carried out only by licensed professionals. J.P. McCurdy Electrical Services offers a 37-point whole house electrical inspection with a written report.

Many people evade an electrical inspection until an electrical problem happens. We suggest that you be more proactive and make full use of our 37-point whole house electrical inspection.

Electrical hazards, such as damaged wire insulation and poor grounding, cause hundreds of accidental electrocution deaths annually in the United States. Overloaded circuits, poor quality electrical equipment and misuse of electrical products are examples of electrical hazards that lead to fire, and injuries.

Our timely and thorough 37-point whole house electrical inspection protects you from electrical risk and helps you to:

Live with peace of mind
Use your electrical system with confidents
Reduce your personal and financial risk

Keep your home free from electrical danger call J.P. McCurdy Electrical Services for your inspection today! 781-595-7074, email: info@mccurdyelectric.com, or www.mccurdyelectric.com

Top Five DIY Electrical Mistakes

August 13, 2015

toolbeltAttempting to do electrical work on your own is not only dangerous, but it can also lead to expensive repairs and fines. Though, there’s nothing wrong with homeowners trying small projects, like repairing drywall or maybe even a backsplash. Nevertheless, electrical wiring should never be DIY. Period.

The stapled wire. Usually DIYers know that you should never nail wires to a wall stud. There are straps that hold the wire tightly in place, but not overly so which can be installed with small nails. However, some people will use a staple gun to keep the wires tight. While it is true that the metal does not actually push through the protective cover, the power of the machine can tear the cover and result in a metal to metal connection.

The wrong connection. A ground-fault circuit interrupter (GFCI) is required for rooms where water and electricity are used in close proximity to one another, for instance, the kitchen and the bathroom. Some people like to install these outlets themselves, but fail to read the wiring diagrams. Wires are incorrectly connected, then malfunctions and worse occur.

Exceeding ampacity. Do you own an older home? If you have not had your house rewired to current codes, there is a good chance that the new ceiling fan you install will draw more current than the old light fixture you replaced. The wiring was run with the old fixture’s in mind. When the ceiling fan exceeds the wiring’s ampacity, the wire is likely to get hot. This can put you at risk of a house fire.

Shaved insulation. A wire’s insulation protects you from harm when you touch it. Unfortunately, sometimes a wire simply does not fit into the tight spaces that you want it to go into. Some people have begun shaving away at the insulation to make the wire more bendable and sufficiently decrease its size to fit into the crevice. This is very dangerous, and damaged insulation may expose live wires that can be deadly to the touch.

Electrical overloads. When an inadequate number of outlets make the use of modern conveniences difficult, the use of extension cords is often a makeshift solution. Occasionally, an extension cord is plugged into another one. When too many appliances are plugged into any one outlet, the wiring is likely to heat up. As previously mentioned, overheating wires are dangerous.